Technical Drawings in Interiors

Topic outline

• 
  

  General

  FRMT 311
  Technical Drawings in Interiors 4(1+3)
  
  D. Ratna Kumari , C.H.Sc,
  ANGRAU, Hyderabad

  Susheela, P. Sawkar,
  UAS, Dharwad
  

  Rachana Krupaker, SRF,C.H.Sc.,
  ANGRAU, Hyderabad.

  
  By the end of the course the students will
  
  

  • Master and understand the drafting and advanced drafting concepts and the use of the drafting tools.
  • Use and understand the geometry related to technical drawing and actual production objects.
  • Understand the drafting techniques and procedures used by architects, architectural drafters, contractors and engineers.
  • Use of proper dimensioning and sectioning practices
  • Understand and practice of orthographic projection drawing (multiview), auxiliary views and perspective drawing concepts as related to practical applications.
  • Understand and practice of axonometric projection and developmental drawing as related to practical applications.
  • Understand and use the techniques and procedures Hatching and Rendering in different drawings

  • News forum
• 
  

  Topic 1

  DRAFTING EQUIPMENT – TOOLS AND MATERIALS

  • Introduction Page
  • NEED FOR DRAFTING TOOLS / EQUIPMENT AND MATERIALS Page
  • Drafting Tools / Equipment Page
  • Drawing Board Page
  • Drafting Machines Page
  • T – Square Page
  • Triangles / Set Squares Page
  • Parallel Slide Page
  • Pencils/ leads Page
  • Erasers/ erasing shield/ drafting powder: Page
  • French Curves / Flexible rule Page
  • Drafting materials Page
  • Templates Page
  • Overlays Page
  • Under lays Page
  • Grids Page
  • Tape Page
  • Drafting media Page
  • Drafting sheet sizes Page
  • Drafting sheet sizes Page
  • American National Standards Institute (ANSI) Page
  • Architecture Engineering and Construction industry (AEC) Page
  • Metric Page
  • Draftingsheet layout Page
  • Drawing formats Page
  • Borders and frames Page
  • Title blocks Page
  • Material or Parts List Page
  • Layout Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 2

  MEASUREMENTS, SCALES AND DIMENSIONING

  • Introduction Page
  • Shapes of scales Page
  • Shapes of scales Page
  • Types of Scales Page
  • Drawing to Scale Page
  • DIMENSIONNG Page
  • Dimensioning Page
  • Definitions and Dimensions Page
  • Hierarchical dimension placement Page
  • Dimension technique Page
  • Dimensioning angled wall and angled objects Page
  • Dimensioning curved objects Page
  • Chain-Parallel dimensioning Page
  • Dimensioning Techniques Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 3

  DRAWING CONVENTIONS

  • Introduction Page
  • Principle of projection Page
  • Multi view drawings Page
  • Oblique Drawings Page
  • Axonometric Drawings Page
  • Perspective Drawings Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 4

  Orthographic Drawings

  • Introduction Page
  • Orthographic Projection Drawing Page
  • Orthographic Projection Drawing Page
  • Types Page
  • Views and projections Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 5

  Axonometric Projection Drawings

  • Introduction Page
  • Definition Page
  • TYPES OF AXONOMETRIC PROJECTION Page
  • Isometric drawings Page
  • Dimetric drawings Page
  • Trimetric drawings Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 6

  Oblique Projection Drawings

  • Introduction Page
  • Definition and method Page
  • Oblique pictorial Page
  • Plan Oblique Page
  • TYPES Page
  • Types Page
  • Cavalier Oblique Page
  • Cabinet Oblique Page
  • Typical Angles of Projection Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 7

  Perspective Drawings

  • Introduction Page
  • Principle Page
  • TERMS USED IN PERSPECTIVE DRAWINGS Page
  • Ground Plane Page
  • Picture plane Page
  • Eye Level / Horizontal Plane Page
  • Horizon Line Page
  • Vanishing Point Page
  • Station Point Page
  • The cone of vision Page
  • Drawing Perspectives Page
  • TYPES Page
  • Types Page
  • One-point perspective Page
  • Two point perspective Page
  • Three-point perspective Page
  • Zero-point perspective Page
  • Curvilinear Perspective Page
  • Reverse Perspective Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 8

  LETTERING – PURPOSES, STYLES AND RULES

  • Introduction Page
  • Styles Page
  • Styles Page
  • Lettering Size and Thickness Page
  • Lettering height Page
  • Lettering thickness Page
  • Lettering placement Page
  • Rules for architectural lettering Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 9

  Symbols - Material, Architectural graphic symbols and Drawing symbols for cross-reference

  • Introduction Page
  • Architectural symbols Page
  • Common symbols used on floor plan Page
  • Material symbols Page
  • Architectural graphic symbols Page
  • Drawing symbols for cross- reference Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 10

  Orthographic Drawings – Plans

  • Introduction Page
  • Drawing set Page
  • Floor plans Page
  • Concept drawings Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 11

  ORTHOGRAPHIC DRAWINGS – DRAWING FLOOR PLANS

  • Introduction Page
  • Drawing floor plans Page
  • Preliminary Considerations Page
  • Selecting the scale Page
  • Beginning the drawing Page
  • Techniques to draw floor plans Page
  • Check list for floor plans Page
  • Lettering Page
  • Dimension Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 12

  Orthographic Drawings – Elevations

  • Introduction Page
  • Concept of an Elevation Page
  • Exterior elevations Page
  • Interior elevation Page
  • Check list for drawing elevations Page
  • Lettering Page
  • Dimensions Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 13

  Orthographic Drawings – Sections

  • Introduction Page
  • Concept of a Section Page
  • Architectural sections Page
  • Identification of sections Page
  • Types of sections Page
  • Steps to draw a section Page
  • Check list for section drawings Page
  • Lettering Page
  • Dimensions Page
  • Guidelines Page
  • Interior detail drawings Page
  • Reflected Ceiling Plan (RCP) Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 14

  SCHEDULES AND SPECIFICATIONS

  • Introduction Page
  • Door Schedule Page
  • Window Schedule Page
  • Checklist for preparing Schedules Page
  • Interior Finish Schedule Page
  • Furnishing, Furniture, and Equipment (FF+E) Schedule Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 15

  HATCHING

  • Introduction Page
  • Tools and Media Page
  • Paper Page
  • Plain bond paper Page
  • Transfer paper Page
  • Tools Page
  • Hatching Page
  • Hatching-Technique Page
  • Hatching-Types Page
  • Crosshatching Page
  • Contour Hatching Page
  • Scumbling and Random Hatching Page
  • Stippling Page
  • References Page
  • Assessment Quiz
• 
  

  Topic 16

  Rendering

  • Introduction Page
  • Rendering Orthographic Projection Drawings Page
  • Rendering Perspective Drawings Page
  • References Page
  • Assessment Quiz