Lesson 8. Traction aids

A number of factors influence the development of traction force by a traction device, which in our case usually is a pneumatic tyre. These factors include area of contact on the soil by the traction device, rolling resistance, tyre inflation pressure, etc. In addition to this a lot of aids can be used for enhancing the traction developed.

Effect of Inflation pressure

Inflation pressure affects the traction as is evident from the Newton Mohr expression. The tyre thrust can be increased if the area of contact on the ground surface is increased specially in case of soils which are cohesive in nature. Hence, as the tyre pressure is decreased, the contact area increases, and traction can be increased, and vice versa. However, the tyres can get cracked or can get damaged due to low pressure.

Tread Pattern and Design

Tyre tread pattern and design is also important for enhancing the traction. The tyre tread pattern depends upon:

  • Tractive efficiency

  • Soil compaction

  • Slip

  • Tyre inflation pressure

  • Direction of motion

  • Normal load on the tyre

Tracks

Tracks have been used as a traction aid in loose ground surface. This is not only used in loose soil in field conditions but also in icy and snowy conditions. This helps in traction by reducing the bearing pressure. These also tend to be a costly option, although a quite a efficient one.

Tyre Chains.

Tyre chains are used around the tyre and helps in improving traction by increasing adhesion in slushy conditions.

Ballasting

The normal load on traction wheels can be increased by putting water or air inside the pneumatic tyre-tube. Filling water in the tube is water ballasting, and filling sand in the tube is sand ballasting. Generally the tube is filled upto maximum of 75% by the ballasting material and rest with the air at the rated air pressure.

Additional weights

Additional weights are also used

f8.1.jpg

f8.2.jpg

Last modified: Monday, 3 March 2014, 4:38 AM