Site pages
Current course
Participants
General
Topic 1
Topic 2
Topic 3
Topic 4
Topic 5
Topic 6
Topic 7
Topic 8
Topic 9
Topic 10
Topic 11
Topic 12
Topic 13
Topic 14
Topic 15
Topic 16
Topic 17
Topic 18
Topic 19
Topic 20
Topic 21
Topic 22
Topic 23
Topic 24
Topic 25
Topic 26
Topic 27
Topic 28
Topic 29
Topic 30
Topic 31
Topic 32
2.2.2 Steps involved in setting up of aquarium
i) Fitting an under gravel filter The purpose of the filter is to remove dirty materials from the aquarium. Under gravel filters are otherwise called as biological filters. Toxic substances like ammonia and nitrite are converted to relatively harmless substances like nitrate by the beneficial bacteria developed on the gravel added in the biological filter. ii) Adding the gravels Gravels with a particle size of 3-5 mm are used to allow good water circulation and to enable the plants to root. iii) Installing the air pump Air pump is installed to operate biological filter for airlifting and aeration. iv) Adding rocks SuitableĀ rocks are firmly laid down on the gravel. The rocks are grouped for creating natural look. Several rock pieces can be stuck together with silicon gel to make a cave like structure, which is essential for maintaining cichlid fishes. v) Filling the tank Tank can be filled with water through hose pipe directed over a rock in order to avoid displacement of gravels. vi) Keeping plants Tall plants are kept at the back and sides. The corners are filled with short species. The roots are buried in the gravel. vii) Putting the cover glass into position Cover glass or plastic sheet are used to cover the top. This type has cutouts for cables and for feeding access. viii) Fitting the electrical wiring Electrical wiring with respect to light and filters are properly connected. ix) Setting up the hood and lighting This is the last stage before introducing the fishes. Fluorescent tubes are used which is fitted inside the hood. The hood may be made of metal, wood or fiberglass sheets. x) Adding the fishes Companionable and compatible fishes are introduced in order to avoid fighting between the fishes. The recommended stocking density of fishes in ornamental fish tank is given below. Surface area of the tanks is taken into consideration for calculating stocking density. Tropical freshwater species For 1 cm length of fish, 30cm2 surface area is required. Freshwater (Cold water) species For 1 cm length of fish, 75cm2 area is required. |