Site pages
Current course
Participants
General
Topic 1
Topic 2
Topic 3
Topic 4
Topic 5
Topic 6
Topic 7
Topic 8
Topic 9
Topic 10
Topic 11
Topic 12
Topic 13
Topic 14
Topic 15
Topic 16
Topic 17
5.3.2.Creasing
Unit 5 - Construction of netting/webbing
5.3.2.Creasing
Creasing is the word derived from the word increase. It is altering the shape of a net by increasing the number of meshes in concerned rows at regular intervals. This is normally done by making an additional loop after the completion of the mesh in the same knot. This loop acts as full mesh for the next row. After which normal braiding is followed. The degree of taper required decides the rate of increasing . It is calculated in the following way.
![Form1 Form1](http://14.139.56.154:82/file.php?file=%2F382%2Funit5.5.2.form1.JPG)
Where
a/b is the increasing baiting ratio
M1 is the more number of meshes on the webbing
M2 is the less more number of meshes on the webbing
D1 is the number of meshes in the depth of the webbing.
![Form2 Form2](http://14.139.56.154:82/file.php?file=%2F382%2Funit5.5.2.form2.JPG)
Creasing is the word derived from the word increase. It is altering the shape of a net by increasing the number of meshes in concerned rows at regular intervals. This is normally done by making an additional loop after the completion of the mesh in the same knot. This loop acts as full mesh for the next row. After which normal braiding is followed. The degree of taper required decides the rate of increasing . It is calculated in the following way.
a/b is the increasing baiting ratio
M1 is the more number of meshes on the webbing
M2 is the less more number of meshes on the webbing
D1 is the number of meshes in the depth of the webbing.
Last modified: Friday, 30 March 2012, 10:00 AM