Site pages
Current course
Participants
General
Topic 1
Topic 2
Topic 3
Topic 4
Topic 5
Topic 6
Topic 7
Topic 8
Topic 9
Topic 10
Topic 11
Topic 12
Topic 13
Topic 14
Topic 15
Topic 16
Topic 17
Topic 18
Topic 19
Topic 20
Topic 21
Topic 22
Topic 23
Topic 24
Topic 25
Topic 26
Topic 27
Topic 28
Topic 29
Procedure
- Samples for length frequency should be collected at random from the commercial catches as soon as they are landed.
- Sampling should be done before sorting into various market size groups
- Length data should be collected separately for different gears and for different mesh types of the same gear.
- Length frequency data are to be collected for about 100 specimens once in a month (25specimens in week) for two years covering a wide range of length groups.
- While collecting data sexes should be treated separately.
- While recording the length data, total length or fork length or standard length should be taken depending on convenience. The data should be recorded in mm or cm in a primary register.
- It is better to take the length frequency data for a minimum period of two years(24 months)
- Classify the individual length recorded into length groups which should not normally exceed twenty five.
- The weekly data may be pooled on a monthly basis
- Age and growth data have to be processed using the integrated method of Pauly
- From the estimated age and growth data, growth parameters can be ascertained.
Last modified: Saturday, 3 September 2011, 4:59 AM