Site pages
Current course
Participants
General
Topic 1
Topic 2
Topic 3
Topic 4
Topic 5
Topic 6
Topic 7
Topic 8
Topic 9
Topic 10
Topic 11
Topic 12
Topic 13
Topic 14
Topic 15
Topic 16
Topic 17
Topic 18
Topic 19
Topic 20
Topic 21
Topic 22
Topic 23
Topic 24
Topic 25
Topic 26
Topic 27
Topic 28
Topic 29
Topic 30
Topic 31
6.2.4.8. Submerged filters
Submerged filters are excellent choices for small systems because they are very versatile. They can be located in a separate tank or in the culture tank. They can be horizontal flow, up flow or down flow. They can be aerated or not.
· The most important consideration for the design is the even distribution of water to the packing.
· It is very common for submerged filters to be designed as large, flat and thin sections of packing with water direction being up flow or down flow.
· There is typically no provision for distributing the water to all areas of the media.
· The length of the water path through the media is very short and the resistance to flow is very low.
· This is a recipe for disaster. The water flow will short circuit though a small section of the media and the rest of the biofilter will become anaerobic.
· Ideally the flow path through a submerged filter should be as long as possible. A long thin raceway is the best. This type of biofilter is known as a long path, plug flow submerged filter.
· Another possible alternative is the use of aeration to induce a circulating flow around a tank.
· The goal should always be to provide sufficient velocity through the media to insure a fresh supply of oxygen and nutrients to the bugs on the surface of the media.