LESSON 4. Deflection of Beam: Direct Integration Technique - 2

4.1 Introduction

In the last lesson we derived the following differential equations.

\[{{{d^2}y} \over {d{x^2}}}=- {M \over {EI}}\]                  (4.1)

\[{{{d^2}} \over {d{x^2}}}\left( {EI{{{d^2}y} \over {d{x^2}}}} \right)=-{{dV} \over {dx}} \Rightarrow {{{d^2}} \over {d{x^2}}}\left( {EI{{{d^2}y} \over {d{x^2}}}} \right) = q\]             (4.2)

In this lesson we will study how to determine the transverse deflection of a beam by solving the above equation by direct integration technique. The procedure is illustrated bellow via several examples.

 

Example 1

A simply supported beam AB is subjected to a uniformly distributed load of intensity of q as shown in Figure 4.1. Calculate the deflection at the midspan. Flexural rigidity of the beam is EI.

Module 1 Lesson 3 Fig.4.1

Fig. 4.1.

Solution

The free body diagram of the entire structure is shown in Figure 4.2.

Module 1 Lesson 3 Fig.4.2 

Fig. 4.2.

Applying equilibrium conditions we have,

\[\sum {{F_x}}=0 \Rightarrow {A_x}=0\]                                                                                    (4.3a)

        \[\sum {{M_B}}=0 \Rightarrow {A_y}l - ql{l \over 2}=0 \Rightarrow {A_y}={{ql} \over 2}\]                                                   (4.3b)

       \[\sum {{F_y}}=0 \Rightarrow {A_y} + {B_y} - ql=0 \Rightarrow {B_y}={{ql} \over 2}\]                                                   (4.3c)

Module 1 Lesson 3 Fig.4.3 

Fig. 4.3.

Using the FBD shown in Figure 4.3 bending moment at a distance x from A is,

\[{M_x}={{ql} \over 2}x - {{q{x^2}} \over 2}\]                                         (4.4)

and equation (4.1) becomes

\[EI{{{d^2}y} \over {d{x^2}}}=- {{ql} \over 2}x + {{q{x^2}} \over 2}\]                          (4.5)

\[\Rightarrow EI{{dy} \over {dx}}=-{{ql} \over 4}{x^2} + {{q{x^3}} \over 6} + {c_1}\]                      (4.6)

\[\Rightarrow EIy=-{{ql} \over {12}}{x^3} + {{q{x^4}} \over {24}} + {c_1}x + {c_2}\]                      (4.7)

where, c1 and c2 are integration constants. In order to evaluate these constants following boundary conditions are used.

y(x = 0)  and y(x = l) = 0

Imposing the above boundary conditions we have, \[{c_1}={{q{l^3}} \over {24}}\]   and  c2=0.

Substituting  c1 and c2 in equation (4.7), we have the deflection curve as,

\[y(x)={{qx} \over {24EI}}\left( {{l^3} - 2l{x^2} + {x^3}} \right)\]                                                                  (4.8)

Deflection at the midspan ( \[x=l/2\]  ) is,

\[y(x = l/2)={{5q{l^4}} \over {384EI}}\]

 Example 2

A simply supported beam AB is subjected to a linearly varying load as shown in Figure 4.4. Calculate the maximum deflection. Flexural rigidity of the beam is EI.

 Module 1 Lesson 3 Fig.4.4

Fig. 4. 4.

 Solution

The free body diagram of the entire structure is shown in Figure 4.5.

Module 1 Lesson 3 Fig.4.5

Fig.4.5

Applying equilibrium conditions we have,

\[\sum {{F_x}}=0 \Rightarrow {A_x}=0\]                                          (4.3a)

\[\sum {{M_B}}=0 \Rightarrow {A_y}l - q{l \over 2}{l \over 3} = 0 \Rightarrow {A_y}={{ql} \over 6}\]                             (4.3b)

\[\sum {{F_y}}= 0\Rightarrow {A_y} + {B_y} - q{l \over 2}=0 \Rightarrow {B_y}={{ql} \over 3}\]                                      (4.3c)

Module 1 Lesson 3 Fig.4.6

Fig.4.6

Using the FBD shown in Figure 4.3 bending moment at a distance x from A is,

\[{M_x}={{ql} \over 6}x - {{qx} \over l}{x \over 2}{x \over 3} \Rightarrow {M_x}={{ql} \over 6}x - {{q{x^3}} \over {6l}}\]                         (4.4)

and equation (4.1) becomes

\[EI{{{d^2}y} \over {d{x^2}}}=-{{ql} \over 6}x + {{q{x^3}} \over {6l}}\]                         (4.5)

\[\Rightarrow EI{{dy} \over {dx}}=-{{ql} \over {12}}{x^2} + {{q{x^4}} \over {24l}} + {c_1}\]                            (4.6)

\[\Rightarrow EIy=-{{ql} \over {36}}{x^3} + {{q{x^5}} \over {120l}} + {c_1}x + {c_2}\]                                      (4.7)

where, c1 and  c2 are integration constants. In order to evaluate these constants following boundary conditions are used.

 y(x = 0) and y(x = l) = 0

Imposing the above boundary conditions we have, \[{c_1}={{7q{l^3}} \over {360}}\]  and c2 = 0 .

Substituting c1 and c2 in equation (), we have the deflection curve as,

\[y(x) = {{qx} \over {360lEI}}\left( {7{l^4} - 10{l^2}{x^2} + 3{x^4}} \right)\]                                                                     (4.8)

Where deflection is maximum, \[{{dy} / {dx}} = 0 \Rightarrow x=0.519l\]  . Substituting  in equation (4.8), we have

\[{\delta _{\max }}=y(x = 0.519l) = 0.00652{{q{l^4}} \over {EI}}\]

Alternative solution using Equation (4.2)

At any distance x from A the intensity of load is \[{q_x} = {{qx} / l}\]  . Therefore equation (4.2) becomes,

\[EI{{{d^4}y} \over {d{x^4}}}={{qx} \over l}\]                           (4.9)

\[\Rightarrow EI{{{d^3}y} \over {d{x^3}}} = {{q{x^2}} \over {2l}} + {c_1}\]                      (4.10)

\[\Rightarrow EI{{{d^2}y} \over {d{x^2}}} = {{q{x^3}} \over {6l}} + {c_1}x + {c_2}\]           (4.11)

\[\Rightarrow EI{{dy} \over {dx}} = {{q{x^4}} \over {24l}} + {c_1}{{{x^2}} \over 2} + {c_2}x + {c_3}\]                 (4.12)

\[\Rightarrow EIy = {{q{x^5}} \over {120l}} + {c_1}{{{x^3}} \over 6} + {c_2}{{{x^2}} \over 2} + {c_3}x + {c_4}\]            (4.13)

Boundary conditions are,

y(x = 0) 0 ; y(x = l) = 0

\[{{{d^2}y} \over {d{x^2}}}(x = 0)=0\] ; \[{{{d^2}y} \over {d{x^2}}}(x = l)=0\]       \[\left[ {{\rm{Moment is zero at end}}} \right]\]

Imposing the boundary conditions we have,

\[{c_1}=-{{ql} \over 6}\] ;  c2 = 0;  \[{c_3}={{7q{l^3}} \over {360}}\] ;  c4 = 0.

Substituting  c1,c2 ,c3  and  c4 in equation (), we have the deflection curve as,

\[y(x)={{qx} \over {360lEI}}\left( {7{l^4} - 10{l^2}{x^2} + 3{x^4}} \right)\]

Where deflection is maximum, \[{{dy}/ {dx}} = 0 \Rightarrow x=0.519l\]  . Substituting x = 0.519l in equation (4.8), we have

\[{\delta _{\max }} = y(x = 0.519l) = 0.00652{{q{l^4}} \over {EI}}\]

 

Suggested Readings

Hbbeler, R. C. (2002). Structural Analysis, Pearson Education (Singapore) Pte. Ltd.,Delhi.

Jain, A.K., Punmia, B.C., Jain, A.K., (2004). Theory of Structures. Twelfth Edition, Laxmi Publications. 

Menon, D.,  (2008), Structural Analysis, Narosa Publishing House Pvt. Ltd., New Delhi.

Hsieh, Y.Y., (1987), Elementry Theory of Structures , Third Ddition, Prentrice Hall.

Last modified: Tuesday, 17 September 2013, 4:20 AM