Site pages
Current course
Participants
General
Topic 1
Topic 2
Topic 3
Topic 4
Topic 5
Topic 6
Topic 7
Topic 8
Topic 9
Topic 10
Topic 11
Topic 12
Topic 13
Topic 14
Topic 15
Topic 16
Topic 17
Topic 18
Topic 19
Topic 20
Topic 21
Topic 22
Topic 23
Topic 24
Topic 25
Topic 26
10.5.3.2.Vertical Mixer
Unit 10 - Methods of feed formulation and manufacturing
10.5.3.2.Vertical Mixer
Vertical mixers may consist of a cylinder, cone, or hopper-shaped container, with a single or double screw (auger) located vertically through the centre (Figure 3). The screw operates at speeds of 100 to 200 rpm and vertically conveys incoming materials from the bottom (generally the intake) end, like a screw conveyor, to the top where they are scattered and fall by gravity. This sequence is repeated several times until a blend is attained (usually from 10 to 12 minutes). These mixers may also be loaded from the top. Results show that vertical mixers are not efficient for uniform mixing of solids and liquids or for materials of quite different particle size or density. This unit is difficult to clean and there may be inter-batch contamination.