APPAREL MANUFACTURING - I 3(1+2)

Lesson 10 : Yokes

Back Yoke With Added Fullness / Gathers

Pattern plot and development

Figure 1

1. Crossmark B, 2 ½ inches from A (varies)
2. Mark D, 3 inches from C (can vary)
3. Draw line from B to D
4. Cut slash line from B to, not through, D and spread 3 inches for pleat intake (lined area)
5. Mark gathers control notches 1 inch out from each side of dart leg. (Dart is indicated by broken lines)